HobbyKing
TURNIGY NANO-TECH 1400MAH 3S 15~25C LIPO AIRSOFT PACK
When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice. The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!Spec.Capacity: 1400mAhVoltage: 3S1P / 3S Cell / 11.1VDischarge: 15C Constant / 25C BurstWeight: 115g (including wire, plug & case)Dimensions: 128x7x20mm (Each)Balance Plug: JST-XHDischarge Plug: Mini-Tamiya (Mini Molex) The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries:-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable, up to 15C on some batteries.-Longer Cycle Life, almost double that of standard lipoly technology.,
5 Reviews
HobbyKing
AIR COMPRESSOR WITH ADJUSTABLE PRESSURE AND PRESSURE GAUGE
| Power | 220-240v AC |
| Amp Draw | 1.0A |
| Power | 1/6 HP |
| Max Pressure | 30PSI |
| Air Flow | 23l/Min |
| Air Tank | 0.3L |
| Noise Level | 47db |
| Air Outlet | 1/8in BSP |
| Air Hose | 1.5m |
5 Reviews
HobbyKing
SCORPION HKII-2221-10 BRUSHLESS OUTRUNNER (SUITS 450 CLASS HELIS)
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 10 Turn Delta |
| Motor Wire | 13-Strand 0.21mm |
| Motor Kv | 3000 RPM / Volt |
| Motor Resistance (Rm) | 0.031 Ohms |
| Max Continuous Current | 42 Amps |
| Max Continuous Power | 550 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.79 Amps @ 10 volts, Max Lipo Cell:4s,
Great upgrade motor for 450 class Helicopters suchs as the ...5 Reviews
HobbyKing
2.4GHZ SUPERMICRO SYSTEMS - FUTABA MODULE.
| Frequency | 2.4ghz |
| Type | FHSS |
| Module Type | Futaba |
| Transmission Power | 18DBm |
| Input Signal | PPM (50mv or 2~5v) |
| Input Voltage range | 5.0~12.0V |
| Weight | 42.5g |
Size:, 58.15mm x 37.26mm x 22.05mm,
Perfect for indoor flyers and anyone who likes to tinker ...5 Reviews
HobbyKing
2.4GHZ SUPERMICRO SYSTEMS - JR MODULE.
| Frequency | 2.4ghz |
| Type | FHSS |
| Transmission Power | 18DBm |
| Input Signal | PPM (50mv or 2~5v) |
| Input Voltage range | 5.0~12.0V |
| Weight | 49.3g |
Module Type:JR, Size:, 64.46mm x 51.80mm x 23.27mm,
Perfect for indoor flyers and anyone who likes to tinker ...5 Reviews
HobbyKing
P-40N GIANT SCALE 6S W/FLAPS, LIGHTS & RETRACTS 1700MM EPO (RTF - MODE 1)
| Wingspan | 1700mm |
| Length | 1500mm |
| Flying Weight | 3500g |
| RX Power Supply | 10A UBEC |
| ESC | 60A OPTO |
Specs:, Servo:, 7 x 17g servo, 4 x 9g servo, Brushless Motor:, 50-60 Outrunner 250kv, Features:, Twist n Turn Electric Retracts with Oleo Leg's & Electric Tailwheel, Includes:, 2.4ghz 6 Channel Transmitter and 6 Channel pre-fitted Reciever, Requires:, 8 x AA Dry Cell Batteries for TX,
The P-40 Warhawk saw action in many theatres in WW2, ...HobbyKing
SCORPION HKII-2221-2010KV BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm(0.87 in) |
| Stator Thickness | 21.0 mm(0.83 in) |
| Motor Wind | 16 Turn Delta |
| Motor Wire | 10-Strand 0.21 mm |
| Motor Kv | 2010KV RPM/Volt |
| Motor Resistance (Rm) | 0.052 Ohms |
| Max Continuous Current | 28 Amps |
| Max Continuous Power | 590 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.175 mm (0.123 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.289 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.01 Amps @ 10 volts, Max Lipo Cell:6s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3026-710 BRUSHLES OUTRUNNER
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 26 mm (1.02 in |
| Motor Wind | 10 Turn Delta |
| Motor Wire 16-Strand | 0.25mm |
| Motor Kv | 710 RPM / Volt |
| No-Load Current (IO/10V) | 1.56 Amps |
| Motor Resistance (Rm) | 0.022 Ohms |
| Max Continuous Current | 60 Amps |
| Max Continuous Power | 1000 Watts |
| Weight | 205 Grams (7.23 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 51.75 mm (2.04 in) |
| Overall Shaft Length | 80.5 mm (3.17 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:5s,
Scorpion Competition Series Brushless Motors are built from the best ...1 Reviews
HobbyKing
SCORPION HKII-2221-12 BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 12 Turn Delta |
| Motor Wire | 12-Strand 0.21mm |
| Motor Kv | 2580 RPM / Volt |
| Motor Resistance (Rm) | 0.038 Ohms |
| Max Continuous Current | 38 Amps |
| Max Continuous Power | 530 Watts |
| Weight | 81 Grams (2.86oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.50 Amps @ 10 volts, Max Lipo Cell:4s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3020-780 BRUSHLESS OUTRUNNER MOTOR
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 20 mm (0.79 in) |
| Motor Wind | 12 Turn Delta |
| Motor Wire | 17-Strand 0.25mm |
| Motor Kv | 780 RPM / Volt |
| No-Load Current (IO/10V) | 1.21 Amps |
| Motor Resistance (Rm) | 0.030 Ohms |
| Max Continuous Current | 40 Amps |
| Max Continuous Power | 800 Watts |
| Weight | 166 Grams (5.86 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 45.75 mm (1.80 in) |
| Overall Shaft Length | 75.4 mm (2.93 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:6s,
Scorpion Competition Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3014-1040 BRUSHLESS OUTRUNNER MOTOR
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 14.0 mm (0.55 in) |
| Motor Wind | 13 Turn Delta |
| Motor Wire | 11-Strand 0.25mm |
| Motor Kv | 1040 RPM / Volt |
| No-Load Current (IO/10V) | 1.35 Amps |
| Motor Resistance (Rm) | 0.026 Ohms |
| Max Continuous Current | 40 Amps |
| Max Continuous Power | 600 Watts |
| Weight | 129 Grams (4.55 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 39.75 mm (1.56 in) |
| Overall Shaft Length | 68.5 mm (2.69 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:4s,
Scorpion Competition Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION HK-2221-8 BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 8 Turn Delta |
| Motor Wire | 16-Strand 0.21mm |
| Motor Kv | 3595 RPM / Volt |
| Motor Resistance (Rm) | 0.024 Ohms |
| Max Continuous Current | 45 Amps |
| Max Continuous Power | 475 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 2.31 Amps @ 10 volts, Max Lipo Cell:3s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
TURNIGY PURE-SILICONE WIRE 8AWG (1MTR) RED
| Temp rating | 200Deg C |
| Guage | AWG 8 (Extra large diameter for big power applications) |
5 Reviews
HobbyKing
TURNIGY PURE-SILICONE WIRE 8AWG (1MTR) BLACK
| Temp rating | 200Deg C |
| Guage | AWG 8 (Extra large diameter for big power applications) |
5 Reviews
HobbyKing
SCORPION HK-2206-3900KV BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 6mm (0.24 in) |
| Motor Wind | 24 Turn Delta |
| Motor Wire | 7-Strand 0.19mm |
| Motor Kv | 3900 RPM / Volt |
| No-Load Current (Io) | 0.83 Amps @ 6 volts |
| Motor Resistance (Rm) | 0.064 Ohms |
| Max Continuous Current | 14 Amps |
| Max Continuous Power | 150 Watts |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 2.5 mm (0.098 in) |
| Body Length | 22.6 mm (0.89 in) |
| Overall Shaft Length | 32.6 mm (1.28 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, Weight:, 31.6 Grams (1.11 oz), Max Lipo Cell:3s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews